SemiFab Remote Air Handling Module Handler RAM 1000 cfm

SemiFab Ram 1000 cfm Remote Air Handling Module
This unit is either unused or barely used. Very Clean.
Model: RAM1000/480/SSI/CE
Serial Number: 8463/02B
Volts/Phase/Hz: 480/3/50-60
Amps: 80
Refrigeration Charge: 10 lbs.
Overcurrent Protection: 10K AIC
Schematic Number: 1120422 Rev. A
Date Mfrd: 12/19/97
Largest Load: 19.3 Amps
NOTE: There are two casters off on the bottom.
On the front panel, you need a Temp C Control & Humidity % RH Control.
The two controllers & lens covers are all very easy to get and replace.

Cranfield Precision ID OD Edge Grinder

Cranfield Precision ID OD Edge Grinder

Model: 2822
Serial no: 2822-00
Year: 1996

This Machine was barely used or not used at all
Equipped With Air Bearing Spindles
Cranfield Precision FNC Control
Made in England
Cost New : $400,000

Solid State Equipment Corporation
Model # 202
Serial no: 2122

Included:
Chemical Cabinet
Model # CSU

Pump/Cooler
Model # LG.HPC

Sullair LS-20S 24KT Rotary Screw Air Compressor 125 HP

Used Sullair Rotary Screw Air Compressor 125 HP
Model: LS-20S – 125H  24KT
Serial no: 003-143393
Air pressure rated maximum: 115/125 psi.

Toshiba Premium Efficiency Motor, 125 HP,
1775 rpm, 230/460 V, 282/141 amps
This machine is located in Chatsworth, CA 91311

Bundgens Wire Cold Forming Nail Pin Machine Buendgens

Bundgens Jouhsen Wire Cold Forming Nail/Pin Machine
Model: US & US2
Approximate Wire Diameter: 0.5-1.2 mm
Length: 10-50 mm
Output: 300 nails per minute

KATO Engineering Frequency Converter Transformer Motor

KATO Engineering Frequency Converter/Transformer Motor Generator
60 HZ to 50 HZ
Max 66 Amps
3 phase 208 volt input
100-600 variable voltage output
With Neutral line

Specification:

KATO A.C MOTOR
Part code no. 4P1-0512
Model: 40LR9E
S/N: 68812
HP: 40
Hz: 60
Phase: 3
RPM: 1800

1 Brand New, Excalibur Systems, MIL-STD-1553 Interface Card for VME and VXI computers.

Model: EXC-1553VME/E-V

What you get:

• Original open box
• Factory sealed, Excalibur EXC-1553VME/E-V Interface card
• Original EXC-1553VME/E-V User’s manual
• Registration sheet
• EXC-1553PCI/EP User’s manual
• Excalibur GALAHAD diskette for EXC-1553VME/VXI

1 Gently Used, Ancot DSC-216/FT SCSI Bus Analyzer.

The Ancot DSC-216 SCSI Bus Analyzer/Emulator, Model DSC-216, is a tool for the development, integration, and repair of SCSI devices. This instrument can monitor and portray on the screen every facet of information about SCSI operation of the monitored SCSI environment. The display format is in plain English for ease of understanding. The Ancot DSC-216 can be used as a SCSI Initiator (host) emulator, programmed for manual or automatic testing. Packaged in a small lightweight portable briefcase, it is exceptionally well suited for field applications where portability and high reliability are important.

Features

• Passive SCSI-2 FAST and WIDE Synchronous/Asynchronous Tracing
• Optional SCSI-2 FAST and WIDE Synchronous/Asynchronous Initiator Emulation
• Tracing of Data Transfer Rates Over 10 MHz
• Trace Memory: 32K Events Standard, 128K or 512K Optional
• REC/ACK Recording, All Four Edges
• Powerful High Level Triggering Capability
• Single-Ended or Optional Differential SCSI Electrical Interface
• Embedded Operating System

Guaranteed to work, sold with 30 days Warranty.

Shipping via Insured Express Mail to Worldwide. 

1 NEW In Box, JDS Uniphase MA20X1E2K-9001 Arrayed Waveguide Gratings

Guaranteed to work, sold with 14 days Warranty.